Joffrey

  • *
  • 10
CC3D Orientation in quad
« on: August 24, 2017, 03:26:50 am »
Hello,

Is it possible to change the orientation of the CC3D to have the usb connector on the side of my quad ?
Actually the connector is toward the back, and there is the video transmitter, and I have to disassemble my quad to connect the cable...
I have seen that it is possible to change motor number... Is it the good way ?

Thanks !

Re: CC3D Orientation in quad
« Reply #1 on: August 24, 2017, 05:01:35 am »
Sure.  Don't change motor numbers / ESC connectors.  Just rotate the board and do this change to "RotateVirtual" setting.
https://librepilot.atlassian.net/wiki/spaces/LPDOC/pages/2818092/CC+Attitude+Configuration
« Last Edit: August 24, 2017, 05:05:46 am by TheOtherCliff »

Joffrey

  • *
  • 10
Re: CC3D Orientation in quad
« Reply #2 on: August 26, 2017, 02:57:29 am »
thanks !!