throttle output low even at full stick.
« on: April 25, 2017, 03:51:05 pm »
hi everyone,

having this problem even throttle stick at full position.can anyone here advice?
thanks.... 8).

rgd
Amin Aziz


f5soh

  • *****
  • 4572
    • LibrePilot
Re: throttle output low even at full stick.
« Reply #1 on: April 25, 2017, 04:39:33 pm »
Hi,

Not sure what you mean... motors still at low rpm or are stopped whatever the Throttle position ?
Is the board armed ?

You can post your config file here: File > Export UAV settings.

Re: throttle output low even at full stick.
« Reply #2 on: April 26, 2017, 05:01:38 pm »
yes sir the board is armed.....but i can't get full throttle output when
i push the throttle to the end... :( :(

f5soh

  • *****
  • 4572
    • LibrePilot
Re: throttle output low even at full stick.
« Reply #3 on: April 26, 2017, 05:05:38 pm »
Config file ? I don't have a crystal ball...

Motors are running ? Did you calibrate the Esc ?

karla

  • *****
  • 629
Re: throttle output low even at full stick.
« Reply #4 on: April 26, 2017, 05:25:51 pm »
Config file ? I don't have a crystal ball...

No crystal ball?
What happened to it Laurent?
:)

Re: throttle output low even at full stick.
« Reply #5 on: April 28, 2017, 07:01:22 am »
sorry it been awhile I'm not online....ok wil try to do the esc calibration.
and will let you know sir...Than you for the advice. 8) 8) 8).

Re: throttle output low even at full stick.
« Reply #6 on: May 01, 2017, 08:12:20 am »
hi all,
here is my config..output & input.

f5soh

  • *****
  • 4572
    • LibrePilot
Re: throttle output low even at full stick.
« Reply #7 on: May 01, 2017, 01:57:23 pm »
You can post your config file here.

Do File > Export UAV settings. and attach file here.

Re: throttle output low even at full stick.
« Reply #8 on: May 04, 2017, 03:07:51 pm »
here is the attachment sir.

f5soh

  • *****
  • 4572
    • LibrePilot
Re: throttle output low even at full stick.
« Reply #9 on: May 04, 2017, 06:40:04 pm »
If you want to share the config you should connect the board before saving the UAV config file or configure something on it.

The file you posted only show default/unconfigured board settings.