Jonh

  • *
  • 11
Flight Mode Switch Settings Screen
« on: February 04, 2017, 07:25:17 pm »
When you place the cursor over the "Save" button in the "Flight Mode Switch Settings" screen to save your configuration you get the following message come up.

"Be sure to set the Neutral Position on all sliders before sending! 
Applies and Saves all settings to SD"

Can someone please tell me what this message means and what sliders it is referring to ????

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Flight Mode Switch Settings Screen
« Reply #1 on: February 04, 2017, 07:34:07 pm »
Neutrals are in first tab.

Apply/Save buttons are the same for the RCInput, FMSwitch settings, Failsafe and Arming settings tab.
Tooltip is a little depreciated now.

Jonh

  • *
  • 11
Re: Flight Mode Switch Settings Screen
« Reply #2 on: February 04, 2017, 07:43:35 pm »
Do you mean the "Channel Values" in the "Remote Control Input" ??
In other words set your Transmitter controls to their Neutral (Mid stick) positions

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Flight Mode Switch Settings Screen
« Reply #3 on: February 04, 2017, 07:47:02 pm »
Initially the slider was used to set the neutral value.
Today they are used to display current value received.

In all cases, nothing related to the physical stick position before save.

For neutral, see the "Neutral" column in RC Input tab.

Jonh

  • *
  • 11
Re: Flight Mode Switch Settings Screen
« Reply #4 on: February 04, 2017, 07:52:52 pm »

Thank you for your responses !!
Does this mean that this message is purely informative and you just go ahead and save your settings ?

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Flight Mode Switch Settings Screen
« Reply #5 on: February 04, 2017, 08:01:51 pm »
Tooltip message are generally informative
This simply mean if you already set the neutral for all channels you can save.


Jonh

  • *
  • 11
Re: Flight Mode Switch Settings Screen
« Reply #6 on: February 04, 2017, 08:04:37 pm »
Great... Thanks very much for the info