647982

  • *
  • 3
Trouble Configuring Accessory 4 and 5
« on: November 29, 2016, 03:57:15 pm »
I'm using PPM input with 12 channels. But on the GCS I see only accessory 0 to accessory 3 under the input channel configuration. How can I associate accessory 4 and accessory 5 with any of the input PPM channels(or basically make them useful)?

Thanks
 

Re: Trouble Configuring Accessory 4 and 5
« Reply #1 on: November 29, 2016, 05:03:52 pm »
I don't know if we support 12 PPM channels.

There are only 4 Accessories.  System -> Settings -> ManualControlCommand -> "all"

647982

  • *
  • 3
Re: Trouble Configuring Accessory 4 and 5
« Reply #2 on: November 29, 2016, 07:35:35 pm »
Thanks for the quick reply.

I saw them in 'Gimbal' and TxPID' tabs as 'Input Channel/Control source' and in 'Vehicle->Custom->Type', and so was wondering if they could be utilized.

hwh

  • *
  • 1018
Re: Trouble Configuring Accessory 4 and 5
« Reply #3 on: November 30, 2016, 01:01:22 am »
It is odd that they're on some of the tabs but there doesn't seem to be any way to set them up.  It's probably something that someone either forgot to add 4 and 5 to the input tab or forgot to remove them from the other tabs.

I've created an issue in Jira about this so that sometime in the future they can be added to the input tab or deleted from the other tabs.
https://librepilot.atlassian.net/browse/LP-451

647982

  • *
  • 3
Re: Trouble Configuring Accessory 4 and 5
« Reply #4 on: November 30, 2016, 06:05:32 pm »
I'm hoping that would be getting added than subtracted:)

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Trouble Configuring Accessory 4 and 5
« Reply #5 on: November 30, 2016, 07:18:51 pm »
Accessory4 and 5 are free internal accessories to be used with waypoints for example.