[jtrout19]

So I noticed that minimosd can be configured and RSSI and BAT and CURRENT sensors can be hooked directly to the OSD. So I decided to connect my battery to my minimosd and it is displaying 17v on a 12v battery. So I am bypassing the REVO all together so how in the world do you configure the OSD to display correct battery voltage? I couldnt find any information on it.

[jtrout19]

How do I connect my analog rssi out from my RX to my Revolution so it will send data to my minimOSD?

[f5soh]

Revolution do not support analog Rssi input.

onboard osd Battery factors are set in Setup menu (using the toggle channel):
https://librepilot.atlassian.net/wiki/display/LPDOC/MinOPOSD+setup#MinOPOSDsetup-RCOSDsetuprc_setup_screen