mottex

  • *
  • 8
Disarming reaction is very very slow
« on: August 26, 2016, 04:52:18 pm »
I've set up a new frame with a CC3d. I use a DX6i and the arming/disarming is on the flab-switch.

It works but the delay is massiv for disarming - at least 5 seconds or more!

Attached my settings.

Thanks for help

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Disarming reaction is very very slow
« Reply #1 on: August 26, 2016, 04:57:09 pm »
Hi, welcome.

Be sure the neutral value is set to middle range on Accessory used as arming switch.


Re: Disarming reaction is very very slow
« Reply #2 on: August 26, 2016, 05:07:32 pm »
Also play with the arming/disarming time. I moved mine to 10ms. Almost instant
5" alien 4s 596grams with battery and GoPro FPV
Lantian LT210 4s 604grams with batt and GoPro FPV
GE X220 4s 6" 513grams with batt and HD cam FPV
Homemade acro X copter. 6" 4s - like a warpquad LOS

Mateusz

  • *
  • 808
Re: Disarming reaction is very very slow
« Reply #3 on: August 26, 2016, 06:11:44 pm »
Also play with the arming/disarming time. I moved mine to 10ms. Almost instant


mottex

  • *
  • 8
Re: Disarming reaction is very very slow
« Reply #4 on: October 11, 2016, 07:53:13 am »
Thanks for your help, the hint from f5soh was the solution with the reaction 10 ms.

Re: Disarming reaction is very very slow
« Reply #5 on: October 19, 2016, 12:27:04 am »
With disarm time set so low you need to be aware that you could disarm it in flight if you are doing stunts.  ;)