[MrKitty]

ok so i been flashing firmware like crazy trying to get my OSD working right nothing i do can get the Horizon working (moveing) im on  GCS 15.09 latest firmware updated throw librePilot i downloaded files from https://librepilot.atlassian.net/wiki/display/LPDOC/MinOPOSD+setup both LP_MinimOSD_CC3D_analog_inputs1708.hex
LP_MicroKvteam_CC3D_analog_inputs1708.hex and flashed both to my OSD board

i do have working telemetry its reading the battery voltage in my OSD i have it wired throw the main port at 57600 so IDK why horizon wont work any firmware or info to fix this problem is greatly appreciated

[f5soh]

Battery voltage has nothing related with working telemetry. This can work with OSD alone.

Any message blinking on screen ?

[MrKitty]

your right unplugged switching the wires pluging into the flex port nothing i still get battery but no telemetry nothing flashing on the screen   

[f5soh]

Set the "OverSpeed" message and place it in a free area, if to close from the horizon in center you will see nothing.


Set the port you use with Telemetry and remember every change in Hardware tab need a board restart.
Check your wiring.

Whats the boot message at start ?

[Mateusz]

I think thread title is incorrect as it suggests that some bug was discovered. There is clearly no reproducible test-case for this to be a confirmed bug, but very likely as it often happens, some sort of user error. I use microminimosd on 4 builds now, and I don't have any problems...