I am trying to setup 2 accessory channels on my Turnigy 9x to use Easy Tune. After completing the process, input will not save. Originally I set accessory 0 and 1 on channels 7 and 8 of the Turnigy 9x. The manual says those are the aux channels. Unfortunately the pots I am trying to use only work on channels 5 and 6 of the radio. But regardless of the operation I still can't save the changes and move forward. I believe the issue is set up but at this point I am unsure. I did receive a message saying the throttle is out of range and I should redo the TX calibration. I have performed this at least 8 times without achieving any success.
Any suggestions would be appreciated!
Thanks