Hi all,
I am on a FlySky FS-T6 tx and so far I had a lot going well. I was able to tweak the settings in a lazy flying mode (2.) to less aggresive max degrees just fine.
I also want to tune a sort of acro flight mode and start learning in Rattitude (only on roll channel first) and I assigned it to a flight mode (1.). The tx flight mode switch only has to 2 positions. I assigned setting banks to the modes (attachment)
But the problem is when I switch to mode 1. the throttle is upped to 47% all of a sudden and all other inputs are stable at 0. I really can't figure out why
The config it switches to are: Pos1 -> Stabalized1 -> Bank1
Help much appreciated!