Hi all，
Recently, I have redesigned the OP's revolution board to fit the raspberry board I/O interface, because the EZ-WifiBroadcast project is popular, and I also want to have a try^-^
and some modify bellows:
1）volt/current interface can support 2s-6s battery input;
2）on board 2S-6S battery DC/DC module , for 5V，15 watt output，for RPI, usbwifi and camera etc；
3）Rcvr I/O 's UART on revolution connected to RPI I/O's UART now for mavlink output for OSD info. maybe developer can do some advanced function like ROS or other
The PCB have finished, and if you also interested in this and want give a try, please contact me, cause we must have 10 pcs, then the SMT factory can do this for us, waiting for you^-^ thanks.
3DPCB top
3DPCB bottom
gerber view
