« previous next »
Pages: [1]
*

mak24

  • **
  • 55
AltitudeVario - Perfect!
« on: April 05, 2018, 03:21:28 am »
Flew my quad indoor in AltitudeVario.  Worked perfectly!

AltitudeHold kept getting the quad either fly up slowly or down and bouncing on the ground.  Thoughts?
Logged
mak24

My Quad Build
Alien 450
Emax 25 Amp ESC
2212 980 KV SunnySky motor
10*4.5 APC Props
Revo FC
GCS 16.09 Rhino
*

TheOtherCliff

  • *****
  • 4304
Re: AltitudeVario - Perfect!
« Reply #1 on: April 05, 2018, 05:19:35 am »
That is the main reason that thermal calibration was added.  :)

So do the thermal calibration, then redo gyro calibration.  Also make sure that light can't get to the baro sensor chip.  Strong light, such as sun light can affect the reading by up to several meters.
« Last Edit: April 05, 2018, 05:54:05 am by TheOtherCliff »
Logged
*

mak24

  • **
  • 55
Re: AltitudeVario - Perfect!
« Reply #2 on: April 06, 2018, 03:46:17 am »
I should have done a better job at Thermal calibration :-)

Really need to get a test quad, don't want to touch this one which has been flying so nicely.

Once again, thanks so much!!
Logged
mak24

My Quad Build
Alien 450
Emax 25 Amp ESC
2212 980 KV SunnySky motor
10*4.5 APC Props
Revo FC
GCS 16.09 Rhino
Pages: [1]
« previous next »