« previous next »
Pages: 1 [2]
*

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Ws2811 not working in next
« Reply #15 on: October 17, 2017, 11:40:20 pm »
Quote
These days the only thing we use is the development version...

Can you test the mr_w branch and report results in PR ?
Logged
*

octavvian

  • **
  • 86
Re: Ws2811 not working in next
« Reply #16 on: October 17, 2017, 11:46:30 pm »
Sure, I'll try that tomorrow, thanks!
So will be no hiccups, can you link a compiled  mr_w branch if you already done it?
« Last Edit: October 17, 2017, 11:59:01 pm by octavvian »
Logged
*

f5soh

  • *****
  • 4572
    • LibrePilot
Re: Ws2811 not working in next
« Reply #17 on: October 18, 2017, 12:03:46 am »
Using latest next build, here is the LP-544 firmware for various boards, flashing using the rescue method.

Logged
*

octavvian

  • **
  • 86
Re: Ws2811 not working in next
« Reply #18 on: October 18, 2017, 09:05:08 am »
Hi, tested, works! See movie. (http://tinyurl.com/ybz6vnac)
Thanks.
Logged
*

Bariton26

  • *
  • 7
Re: Ws2811 not working in next
« Reply #19 on: October 18, 2017, 11:00:46 am »
I tried your lp-544 buildwith revolution firmware, it did not work with me, strange, because it worked in 16.09 version. So it must be my clone revolution board.
Thx anyway, I will rely on the telemetry.
Logged
*

octavvian

  • **
  • 86
Re: Ws2811 not working in next
« Reply #20 on: October 18, 2017, 12:03:22 pm »
I think you should double check wiring and settings, because I do have a mini revo (cheapest Chinese clone available) and the fix was fine. :) And I do rely o telemetry especially when the "thing" is in air.
« Last Edit: October 18, 2017, 12:26:54 pm by octavvian »
Logged
Pages: 1 [2]
« previous next »