[Wingspanner]

Hi Guys i'm a bit of newby so bare with me. I 've just finished building a Tarot 250 with the following spec.
Product Specifications:
250 space through machine FPV Carbon subsection TL250C * 1
Mini CC3D through the machine open source flight control TL300D2 * 1
Tarot 5 inch paddle clover / couple / white TL300E1 * 1
Tarot 5 inch paddle clover / couple / red TL300E2 * 1
Tarot 12A mini power transfer TL300G1 * 4
Tarot MT1806 positive self-locking screw motor / silver cap TL300H1 * 2
Tarot MT1806 self-locking anti-thread motor / black hat TL300H2 * 2

Flew first time on take off but now i seem to have the following problem.
I have calibrated all the esc's both singularly and all together check motor rotatation and prop type but it still tends to flip on applying throttle.
Any ideas?

[f5soh]

Hi, welcome.

How the flight controller is mounted / oriented ?
A violent take off flipping like this is likely a wrong FC orientation or a wrong motor assignment.
Output1 is North-West motor, output2 is North-East motor, etc...

Check the orientation (search for a arrow in FC, the virtual attitude rotation will be all 0 if pointing forward) and adjust the virtual attitude rotation if needed.

[Wingspanner]

Thats it cheers!!!


Sent from my iPhone using Tapatalk

[f5soh]

Great