Skipp

  • *
  • 11
PPM Input on FlexiIO for Revo China Clone
« on: March 15, 2017, 07:52:07 am »
Hi,

I use this Revo Clone: http://www.banggood.com/OpenPilot-CC3D-Revolution-Revo-10DOF-STM32F4-Flight-Controller-Staight-Pin-p-1000068.html?rmmds=search

But canĀ“t get PPM Input on Pin 5 of FlexiIO Port. In Hardware Tab FlexiIO is set to PPM+Telemetry an Frsky X4RSB is flashed to PPM Firmeware. Maybe this Clone use some other Pin to PPM Input? Any ideas?

Thanks
Skipp

Jhinta

  • ***
  • 198
Re: PPM Input on FlexiIO for Revo China Clone
« Reply #1 on: March 15, 2017, 10:18:43 am »
Don't know witch pin it is but it is the white one.
Also there is a wiki for this info

Verstuurd vanaf mijn LG-D855 met Tapatalk

Re: PPM Input on FlexiIO for Revo China Clone
« Reply #2 on: March 15, 2017, 05:02:39 pm »
It may be best to look in the wiki and count the wires (not rely on wire color) because different manufacturers sometimes use random wire colors.

Skipp

  • *
  • 11
Re: PPM Input on FlexiIO for Revo China Clone
« Reply #3 on: March 16, 2017, 12:54:55 am »
Problem solved... forget to jumper  X4RSB on binding, so no PPM Output. After a long evening of setting up the complete plane a stupid mistake.