Hy there, im getting a little bit crazy right now, im building my first racing quad all by myself (im an old guy and a noob), but cant get over a specific issue that kills all the fun.
I bought a FrSky Taranis plus (actually only because i didnt get it to work with my walkera devo7) and a FrSKY X4R 3/16CH receiver. I made a build with a cc3d evo,(250/3s,12Amps) nothing special i thought. so i build it all together,
i used Libre Pilot because i saw a lot of very specific and good youtube videos explaining everything and it looked so easy...
I could do acctually everything, could bind rx to tx, all motors work fine, etc.. except that i only have 4 freaking dammn channels for the main controls. that was the reason i actually bought a taranis and a receiver
with S.Bus in the first place, (actually i didnt cared about S.Bus i just wanted the newest shit) i want to program a bunch of stuff on every single knob on this damn thing. most of all different flight modes. but now i cant. i tried
for hours saw about every youtube video on the subject, read the manual which is ridiculous) and after hours of trying, updating every possible firmware etc.. realised i maby need to plug in some jumpers while binding. so i tried
that in every freaking possibility because there is no exact explanation on how, but it didnt helped either. i just have 4 channels to use. Can anybody maby have any tipps or links to good manuals?
i googled for hours in english and german sites but nothing useful did i found :-(
would be very thankfull for any input or what i could try. Otherwise i will probably switch to another flight controller board, any good advices?
Thanx so much for any help,
greetings Andrew
ps. i would also be happy to could just bind the X4R to the taranis anyhow to have more than 4 channels i dont care so much about s (s = shit? ) bus ;-)