[[email protected]]

I have a revolution board and used Librepilot to load the bu_revolution.opfw. I used rescue and loaded the bu_revolution.opfw. I then used upgrade. The board reboots but keeps disconnecting and will never connect. I am not able to boot the board. What am I missing.

Right now I just need some direction on how to load the bootloader, firmware, or whatever I need to move forward.

Pretty new to this board and would love any help I can get.

[f5soh]

Hi, welcome.

From this post : https://forum.librepilot.org/index.php?topic=208.0

Resurrect firmware to download: https://forum.librepilot.org/index.php?action=dlattach;topic=208.0;attach=351

Try :

Flash and run the resurrection firmware:
- Run the GCS
- Unplug the board from power and USB.
- Go to the firmware tab in the GCS and press the Rescue button.
- Plug the board into USB.
- GCS recognizes the board in a few seconds.
- Press the "Open" button to navigate to and select the correct resurrection firmware opfw file that you downloaded.
- Press the Flash button to write the currently built firmware.
- It will start in a few seconds.  First it will erase, then it will write (flash) the firmware.
- When the flash is done, press the Boot button which will cause the resurrection firmware to run
- Let it run for 30 seconds at least.

Redo normal firmware upgrade to use the  firmware from GCS.