[engine99]

Just configured my CC3D for the first time - so there's definitely a chance I did something wrong.
Once I take off the flight is very wobbly - I've attached video and settings so you can see it.
I wonder if this is a setting issue or something else that's wrong - it almost seems like one of the settings is completely out of  whack. I've also attached the rotor setup since I initially thought that maybe I mounted one wrong but I didn't see anything out of the norm.
I've attached the videos via amazon S3 since they were to large to upload via attachments
https://s3-us-west-2.amazonaws.com/wobblyflight/FullSizeRender.mov
https://s3-us-west-2.amazonaws.com/wobblyflight/IMG_1232.MOV
https://s3-us-west-2.amazonaws.com/wobblyflight/MOVIE.mov

[engine99]

Here is the uav file

[engine99]

One more thing - at the very end it has a tendency to flip over.
Not sure if that is normal - if this is related - but when i land with little throttle and then add more - it becomes very unstable.

I did do default settings for most of it - not sure if the ESC selection would make a big different.
The drone itself is a storm racing drone type A.

[engine99]

This is resolved now - Went through the flight controller setup again and chose different ESCs and that took care of it.
It's flying !!!