[RedSun]

I'm a newbie in drone, I just using my drone about two weeks, I spend much time on my drone, here is my drone part list, I want someone can give me some advise about my drone.
 1. CC3D Evo Flight controller
   2. 2212 1000kv brushless motors with Propeller and adapter
   2.1  30A ESC
   3. Power Distribution Board
   4. Flysky fs-t6 Transmitter, RC
   5. 10000mah lipo battery
   6. Flight controller configured with Libre Pilot 15.09
Now i don't have any other plan, I just want know what about my drone.

[gionibravo]

I think the battery is too big.
If u have big battery, drone is heavier so it will drain faster.
it is cheaper to buh a 3000 - 5000 mah than a 10000 mah,

[jhm5z588]

What Frame do you have this on and what size props?

[RedSun]

OK

[RedSun]

Thanks

[vickyace]

yeah, I agree with @gionibravo , the battery is too big and heavy,maybe you can choose 5000mAh lipo battery

[saTxRxasis]

By looking of your motor so I assume you will use frame class 350-450.
The motor good enough for 9"-10" props
But the lipo will be too heavy.
10.000 mAh lipo 3S will be more than 500 gr.

Your assumed nett total thrust will be around 2 kg.
If you use standar F450 frame, your AUW without battery will be around 900 gr.
With battery will be more that 1.4 kg, more than 50% from your total nett thrust so you'll be hardly hovering your aircraft.

Try with lowering the weight of battery by using lower capacity lipo.
5000 mAh will be your max option.
Another hint, if you use LiHV battery maybe better because this type of battery have lower weight than same capacity LiPo. And give more flight time too.

[tdr_250]

Yes the battery is Way to heavy for your setup ....but thats kind of easy to fix...


Try do it as light as possible !

It does allot of difference its a common mistake that people buy to big battery packs.....

Better to use a 800mah 3s for fpv system and gimbal and that kind of things and maybe a 4 s 3500 mah -4500 mah battery for the craft....