[f5soh]

Really strange... and all other data like the horizon is working ?

[hwh]

...the mini revo doesn't want to enter config mode. ...
... tx and rx for telemetry are taken on the flexi-io port...

If your "mini revo" is the one the Chinese call "Revolution Mini" how did you wire the flexi-io port?  As a matter of policy the LP wiki doesn't try to show all the Chinese clone variations, only the original revo with it's 10 pin flexi-io port.  Did you adjust the pin numbers to account for the two pins (3 and 4) the Chinese left out to make it an 8 pin connector?

[anthropo]

...the mini revo doesn't want to enter config mode. ...
... tx and rx for telemetry are taken on the flexi-io port...

If your "mini revo" is the one the Chinese call "Revolution Mini" how did you wire the flexi-io port?  As a matter of policy the LP wiki doesn't try to show all the Chinese clone variations, only the original revo with it's 10 pin flexi-io port.  Did you adjust the pin numbers to account for the two pins (3 and 4) the Chinese left out to make it an 8 pin connector?

I Shifted the wires on the left, as the 2 and 3 on the 10 pin is inocuppied and the rest is labelled the same...

[anthropo]

Really strange... and all other data like the horizon is working ?

EDIT : The horizon is working.

[anthropo]

Hello,

i have solved my problem. In fact, at the end of all my tests i have tried to add a ppm channel that GCS didn't see. so i put ppm and channel 6 in input config.

that was the cause of no throttle neither flight mode in OSD

thanks