[Freeflyerjosh]

Hello everybody,
I have a storm racing drone SR210 with a cc3d loaded with Openpilot. I would like to update my firmware to Librepilot. Is there a way to save my current settings (PID's, Roll rates, all current basic programming) and then reload them once I update to Librepilot.  I would ultimately like to tune my PID's, but can't because Openpilot is no longer available for download, and I don't feel comfortable trying to set everything up manually once I update to Librepilot, since I have never done a basic setup or tune before. Thanks in advance.

[hwh]

The files saved by OP are incompatible with LP.   The procedure usually used is to do screen captures/prints of all the config screens in OP before you switch to LP and "upgrade and erase" the firmware.  It needs the erase so don't skip that part and just do an upgrade.

Once it comes up in LP you can use the info on the screen captures/prints to make the settings in LP.  I'd recommend going through the wizard first and then changing settings to match the old OP if it doesn't work right.

[Freeflyerjosh]

Thanks for the quick reply. I haven't saved any files yet from OP since I don't have it loaded on my computer. Is there a way to access the current quad settings through LP to see what my current settings are, or am I just kinda out of luck when it comes to seeing what my settings are like right now? Or, is there a place still available to download OP so I can adjust PID's?

[hwh]

Through the magic of the internet archives: The OpenPilot web site is down but archive.org has an archived copy of the gcs installer

for windows:
https://web.archive.org/web/*/http://www.openpilot.org/wp-content/uploads/OP-Downloads/OpenPilot-RELEASE-15.02.02-win32.exe

or for linux:
https://web.archive.org/web/*/http://www.openpilot.org/wp-content/uploads/OP-Downloads/openpilot_15.05.2-1_amd64.deb

or for Mac OS-X:
https://web.archive.org/web/*/http://www.openpilot.org/wp-content/uploads/OP-Downloads/OpenPilot-RELEASE-15.05.2-osx.dmg

Click on the blue circled date and it should download.