« previous next »
Pages: [1]
*

rvosatka

  • *
  • 3
ESC's with PWM?
« on: April 12, 2016, 10:39:17 pm »
Are RapidESC mandatory on CC based boards when you use a PWM receiver?
Logged
*

f5soh

  • *****
  • 4572
    • LibrePilot
Re: ESC's with PWM?
« Reply #1 on: April 13, 2016, 10:25:28 am »
If you use PWM receiver with a CC3D, output should be set to PWM - 490Hz

With lower refresh rates you may see poor stabilization results.
Logged
Pages: [1]
« previous next »