« previous next »
Pages: [1]
*

zukenj

  • ***
  • 202
GCS HomeLocation in Setting (System Tab)
« on: March 23, 2016, 04:26:17 pm »
Hello,

When I set the HomeLocation to false on the System Tab and click on the Hard Drive with the red arrow, I wait a little and it will change to True.

It working as intent?
How do I know that the setting was saved?



Armando
Logged
FS-TH9X RC
F450 Clone
Revolution FC
EMAX 2213 935 KV
HK 30A ESC UBEC running BLHeli 14.4
10x4.5 Propellers
DJI Naza clone Ublox M8N GPS
*

f5soh

  • *****
  • 4572
    • LibrePilot
Re: GCS HomeLocation in Setting (System Tab)
« Reply #1 on: March 23, 2016, 04:29:37 pm »
When you set to false, the board refresh Home location coordinates from GPS data.

If you keep the "false" saved, the Home is updated every time you set power.

Bottom page:
https://librepilot.atlassian.net/wiki/display/LPDOC/Setting+Home+location
Logged
*

zukenj

  • ***
  • 202
Re: GCS HomeLocation in Setting (System Tab)
« Reply #2 on: March 23, 2016, 06:02:52 pm »
F5soh thanks for your quick reply.

That is what I did in in the videi, and you can see that will go back to True.

???
« Last Edit: March 23, 2016, 09:05:17 pm by zukenj »
Logged
FS-TH9X RC
F450 Clone
Revolution FC
EMAX 2213 935 KV
HK 30A ESC UBEC running BLHeli 14.4
10x4.5 Propellers
DJI Naza clone Ublox M8N GPS
*

f5soh

  • *****
  • 4572
    • LibrePilot
Re: GCS HomeLocation in Setting (System Tab)
« Reply #3 on: March 23, 2016, 09:13:11 pm »
After the Home is set, he show: Set to True
Logged
Pages: [1]
« previous next »