Return to Base understanding correct?

Started by mazevx

No fix with the gps and other problems

Started by Zikelskim

Position Hold issue

Started by smark-

NMPC Controller for Hexacopter

Started by prashinr

PathPlan upload

Started by vgwit

Path Alarm - Waypoint flying

Started by mak24

Controlling CC3D from Arduio/RPi via the receiver PINs

Started by ryzhiy

Anybody flown helis (single main rotor) with baro or GPS modes?

Started by TheOtherCliff

Couple Flight Controler with Arduino Board via I2C?

Started by Vagaboul

Sparky2 vs Revo

Started by imazman

Oplink - does air side still need to be coordinator?

Started by carbo

Do any "OpLink Air/Ground" have the good RF chip?

Started by TheOtherCliff

Mag_transform values and calibration sequence

Started by Tongala

GPS V9 Mag Usage

Started by Highspeed1964

homeleash cause a config error

Started by supermax

Magnetometer calibration and dual mags

Started by macphyter

How to use POI correct

Started by DocHardinger

I can't arm motor

Started by supermax

ublox m8n can't connect Revo

Started by supermax

What if no MAG?

Started by Aner