31

Hardware / Re: Power and signal distribution PCB for mini Revo flight controllers

« Last post by trust on September 08, 2022, 08:17:00 pm »

Took a while to get parts, ship to assembler, do the work and return. Just received today.
Cost full board $22.75 parts + $10 PCB + $80 assembly = $112.75
Servo board $1.98 parts + $5 pcb + $40 assembly = $46.98
2x ea = $319.46
Ok?
If its too much no worries, we can use them in projects. Assembly cost was a bit more than I expected, but she does excellent work.
Where am I shipping to? You can message me adr, I'll send you contact info.

32

Hardware / Re: Hobbyking discontinued Revo & Revo Mini

« Last post by trust on September 08, 2022, 07:52:22 pm »

Where did you get the minimOSD?

33

Hardware / Re: Hobbyking discontinued Revo & Revo Mini

« Last post by Alex H. on August 30, 2022, 09:58:56 am »

Just received my rfm22b, minimOSD(not in the picture) and Revolution V2.
Now I'm missing a OPLINK mini.
Wrong cable adaptor...

34

Firmware General / Re: Next packages (r7xx)

« Last post by octavvian on August 22, 2022, 11:30:16 am »

Thanks!

35

Firmware General / Re: Next packages (r7xx)

« Last post by TheOtherCliff on August 21, 2022, 11:44:08 pm »

We have been actively working to get the latest next released.  I personally have been working full time on it for 2 months (I'm retired).  Others are on it too.

We are trying to decide how much time to spend on getting new code written versus getting it out quicker with a another release relatively soon (not years) after that.  If you can build next, you will see what the release will have in it.

https://forum.librepilot.org/index.php?topic=5022.0

36

Firmware General / Re: Next packages (r7xx)

« Last post by octavvian on August 21, 2022, 03:57:12 pm »

OK, 2 years have past since last discussion and still no new build...
Life goes on 🙄.

37

Hardware / Re: Power and signal distribution PCB for mini Revo flight controllers

« Last post by karla on August 08, 2022, 02:13:07 am »

Thats fine, thank you!
No hurry.
Regards
Karl

38

Hardware / Re: Power and signal distribution PCB for mini Revo flight controllers

« Last post by trust on August 07, 2022, 05:53:47 pm »

No problem on small order. I did this knowing it would be small numbers - just want to help out fellow enthusiasts.
I'm planning on making up 8 or so units - at least 2 with just servo pin blocks for you.
I have a gal who does assembly for us free-lance and does impeccable work and is reasonably cheap - $30/hr
May take a week to finish if that's ok. After I know how much she'll charge I'll have a better idea how much it costs.
I'll just charge her cost plus parts cost & shipping.

39

Hardware / Re: Power and signal distribution PCB for mini Revo flight controllers

« Last post by karla on August 07, 2022, 02:39:08 am »

Okay, thank you.

I realise my need is a very small number and maybe not worth the trouble to make it.
Can you give a price for 2 units that includes the heat sink+fan plus the two LM1085 5V 3A linear regulators?
In addition to that I am interested in two small(er) units with only with the servo pin part.
That will be installed in helicopters and need to be small but don't need gps, mags, osd etc

Maybe we can continue discussion in PMs.
Regards
Karl

40

Hardware / Re: Power and signal distribution PCB for mini Revo flight controllers

« Last post by trust on August 06, 2022, 08:35:23 pm »

Yes. There is a single heat sink+fan but underneath are two LM1085 5V 3A linear regulators. The left most one is used for the rcvr, flight controller, etc power. The right most one for servos, if there is no power supplied by the ESCs.