LibrePilot Forum
Users => Applications - FPV => Topic started by: Pinoteo on February 05, 2016, 08:53:29 pm
-
Hi all i need a little help.
When i try to flash the micro minimosd with the config tool it says error opening com port, what am i missing?
-
Hi,
Select the right port, connect the DTR pin ?
-
it makes me select only one port (com1) even if the micro minimosd is unplugged. The dtr is plugged in.
-
Which method do you use ?
ftdi or board/comBridge ?
-
FTDI
Thanks for your help.
-
Solved, I'm sorry, I had a broken pin on the usb cable just changed the cable and it works.
Thank you very much for your help.
-
Put this cable to trash :D
-
Ye that's for sure, after 3 hours spent in looking for what could be the problem, the trash is the only place possible for that cable.