LibrePilot Forum

General Category => General Discussion => Topic started by: bmw111 on February 02, 2016, 08:13:08 pm

Title: Set level on board power-up?
Post by: bmw111 on February 02, 2016, 08:13:08 pm

Hi,

I'm assuming the answer is "No" -- does CC3D w/LP "set level" every time the board/vehicle is powered up, or only when you actively calibrate the board?

Title: Re: Set level on board power-up?
Post by: f5soh on February 02, 2016, 08:19:12 pm

Board need to be still while initializing gyros in complementary (basic).

No need to be level, accelerometer settings are stored after the level calibration.

Title: Re: Set level on board power-up?
Post by: bmw111 on February 02, 2016, 08:39:33 pm

Thanks.