LibrePilot Forum
Development => GCS General => Topic started by: jochene on July 27, 2015, 07:26:36 am
-
Hello,
I have noticed a few things in the LibrePilot GUI.
Perhaps it is possible to find a solution with my brief description.
It would be nice to have two refresh button that lets you re-read the data from the board or can refresh the view in the Gui.
When setting a helicopter, it is imperative that you the "Curve 2" to "Collektive" set at a pitch heli the tab "Custom". Maybe you can automate.
The "Collektiv curve" must heli the tab "Curve Settings" from 0.00 - 1.00 are set. The default value -1.00 - 1.00 am is not working. Perhaps even this value can be set automatically.
The tab "Advanced Settings" (Heli) sometimes appears pushed together so that the values are not visible. These values are sometimes all at "0", only by reconnecting the correct values are displayed.
The values in the tab "Advanced Settings" (Heli) can be changed and saved, but the storage has no effect. The next time you connect the values as before. If these values can not be changed, this should not be changeable.
-
Hello,
i have testing today the r177.
Perfekt
Thanks