LibrePilot Forum
Development => Firmware General => Topic started by: sky59 on January 25, 2016, 05:27:00 am
-
I just tested Spitfire with standard settting when gyro on. But ailerons are small so plane makes turns with abour 200m diameter. Which graph to change and how?
In manual mode /gyro off/ everything is perfect. We need assisted regime for landing.
Thanx
-
change from Attitude to Rattitude can help?
-
Rattitude works perfectly but if you want some Acro it can be only done at full stick... Every time he want to return level.
Acro+ works great also.
For fixed wing you can increase the default Attitude response from 55 to 70/90degrees.
Attitude stabilization numbers can be increased as well from 2.5 to 3.5
-
Rattitude works perfectly but if you want some Acro it can be only done at full stick... Every time he want to return level.
Acro+ works great also.
For fixed wing you can increase the default Attitude response from 55 to 70/90degrees.
Attitude stabilization numbers can be increased as well from 2.5 to 3.5
thanx!
so should I set it up like this?: Ailerons Level Rudder Speed (I do not remember by heart exact names :)
Rattitude Rattitude Axislock manual
for manual I have manual manual manual manual
-
Just select the stabilization you want on every axis.
You can also mix Attitude for Pitch and Rattitude for Roll
-
Just select the stabilization you want on every axis.
You can also mix Attitude for Pitch and Rattitude for Roll
thank you for explanation! you seem to know a lot......
I have some unclear information but I woul like to be sure...
Would it be possible briefly explain (or where I can find it) what every possibility means? Attitude, rattitude, Lockaxis, manual (this is clear:) ).....
-
When you are in Flight Mode tab, click on (?) icon on bottom.
This icon will open this page:
https://librepilot.atlassian.net/wiki/display/LPDOC/Input+Configuration
Take a look also at this table:
https://librepilot.atlassian.net/wiki/display/LPDOC/Stabilization+Configuration#StabilizationConfiguration-Effectofsettingsandstabilizationmodes
-
When you are in Flight Mode tab, click on (?) icon on bottom.
This icon will open this page:
https://librepilot.atlassian.net/wiki/display/LPDOC/Input+Configuration
Take a look also at this table:
https://librepilot.atlassian.net/wiki/display/LPDOC/Stabilization+Configuration#StabilizationConfiguration-Effectofsettingsandstabilizationmodes
PERFEKT! Thanx!
But :) I studied it and I would like to ask question about
"Attitude - Stick controls bank angle in Pitch/Roll, without action aircraft stay level. Full stick give max bank angle set for axis in Stabilization tab."
there are 4 tabs: basic, advanced, expert, attitude hold - do they set up the same parameters? so it does not matter which tab I use? except the fact that
for instance I can set more parameters in advanced than in basic? if there is some common parameter
and I change it in advanced I would see it also in basic (if exist in basic) ?
the quote above speaks about " max bank angle " but I am not able to find exactly this parameter....? is it called in different name?
I just need in attitude mode that airplane is able to make sharper curve.... if it is in degrees I could imagine to allow to roll (decline) 30degrees more, can you please help?
thank you very much!
EDIT: I think I found it on Advanced tab? Correct? But I must click Use Advanced Configuration?
-
Looks the second link with table:
Attitude Mode Response (deg) ---> How far to bank at full stick deflection
-
For other question, look here: https://forum.librepilot.org/index.php?topic=706.0