LibrePilot Forum
International Forums => Deutsch => Topic started by: markus1234 on January 16, 2016, 05:42:49 pm
-
Hallo zusammen,
Ich habe ein RevoMini von BG auf das ich ohne Probleme Taulabs geflashed habe. Jetzt würde ich gerne LibrePilot probieren - funktioniert aber nicht.
Automatisches Update geht nicht. Per Recover in den Bootloader und dann die LP firmware manuell flashen geht - aber es startet nicht.
Wenn ich auf die gleiche Art dann wieder TL flashen, startet es wieder.
Hat jemand einen Tip für mich?
Gruß,
Markus
-
Flash and run the resurrection firmware:
- Run the GCS
- Unplug the board from power and USB.
- Go to the firmware tab in the GCS and press the Rescue button.
- Plug the board into USB.
- GCS recognizes the board in a few seconds.
- Press the "Open" button to navigate to and select the correct resurrection firmware opfw file that you downloaded.
- Press the Flash button to write the currently built firmware.
- It will start in a few seconds. First it will erase, then it will write (flash) the firmware.
- When the flash is done, press the Boot button which will cause the resurrection firmware to run
- Let it run for 30 seconds at least.
Update&Erase again to replace resurrect firmware.
-
Works perfect, thank you.
Can you tell me what the resurrection software do?
-
reformat flash ram because something wrong and cause continuous reboot.
-
Thank you.