LibrePilot Forum

Development => Hardware => Topic started by: JaeMelo on January 07, 2016, 07:52:01 pm

Title: OpenPilots PCB Fab House
Post by: JaeMelo on January 07, 2016, 07:52:01 pm

Do any of you from the old OP dev team know the name of the fab house OpenPilot used for their original hardware?! I've wasted a ton a money with SeedStudio and simply don't want to risk taking anymore chances.

Title: Re: OpenPilots PCB Fab House
Post by: f5soh on January 07, 2016, 07:56:23 pm

Bittele
http://www.7pcb.ca/

Look also OSH park ?
https://oshpark.com/shared_projects/8Dz8BT1f

Title: Re: OpenPilots PCB Fab House
Post by: JaeMelo on January 07, 2016, 11:09:26 pm

Thanks a ton mate. I just finished speaking to them not long ago and they are reviewing the Gerbers as we speak :)

It seems like Bittele uses a fab house in China judging by the response I got in an email about the Chinese New Year delays. As for OSH park I have used them in the past.. Their boards are flawless however the only I problem I have is the lack of choice regarding solder mask colors.

Title: Re: OpenPilots PCB Fab House
Post by: JaeMelo on January 11, 2016, 06:34:53 am

Quote from: f5soh on January 07, 2016, 07:56:23 pm

Bittele
http://www.7pcb.ca/

Look also OSH park ?
https://oshpark.com/shared_projects/8Dz8BT1f

Looks like we have a problem -__-
The grammar in this report is difficult to understand... Any idea how I should respond to this?! Not quiet sure if they are trying to say its hard for them to keep the solder mask from bridging for the IC pads where the MPU6000 goes or what.

(http://imagizer.imageshack.us/v2/1280x1024q90/908/Y5trMQ.png) (https://imageshack.com/i/p8Y5trMQp)