LibrePilot Forum
Development => Hardware => Topic started by: ernstock on December 30, 2015, 04:21:50 pm
-
Hi.
If I may trouble yourselves :
Is it ok to provide power to the cc3d board ( at 5v ) via the flexi or main port ?
In the Wiki it seems to imply that they are meant as outputs.
Cheers
-
Hi.
If I may trouble yourselves :
Is it ok to provide power to the cc3d board ( at 5v ) via the flexi or main port ?
In the Wiki it seems to imply that they are meant as outputs.
Cheers
No problem to me. I power the revo via the sonar port too.
-
Thank you.