LibrePilot Forum

Users => Vehicles - MultiRotors => Topic started by: Alex H. on July 27, 2022, 07:51:43 pm

Title: GCS Ubuntu + cc3d board
Post by: Alex H. on July 27, 2022, 07:51:43 pm

Hi,
as I have switched to Ubuntu, I'm trying to connect my cc3d board to PC in order to configure it with GCS 16.09+r894.
Looks like the board is not recognized/seen by the software...
In dmesg I can see:

[ 2513.805164] usb 1-3.1.1: USB disconnect, device number 24
[ 2515.563930] usb 1-3.1.1: new full-speed USB device number 25 using xhci_hcd
[ 2515.690170] usb 1-3.1.1: New USB device found, idVendor=20a0, idProduct=415b, bcdDevice= 4.01
[ 2515.690175] usb 1-3.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2515.690178] usb 1-3.1.1: Product: CopterControl
[ 2515.690180] usb 1-3.1.1: Manufacturer: openpilot.org
[ 2515.690181] usb 1-3.1.1: SerialNumber: 52FF69064888555372650987+BL
[ 2515.764386] hid-generic 0003:20A0:415B.0016: hiddev1,hidraw5: USB HID v1.10 Device [openpilot.org CopterControl] on usb-0000:07:00.1-3.1.1/input0

Can someone tell me what should I do?

Thanks,
Alex

Title: Re: GCS Ubuntu + cc3d board
Post by: Alex H. on July 27, 2022, 10:12:59 pm

I found my problem:
Connecting your hardware from https://librepilot.atlassian.net/wiki/spaces/LPDOC/pages/57671696/Linux+-+Building+and+Packaging (https://librepilot.atlassian.net/wiki/spaces/LPDOC/pages/57671696/Linux+-+Building+and+Packaging)