LibrePilot Forum
General Category => General Discussion => Topic started by: francknivada on March 28, 2019, 04:49:54 pm
-
I have build my with dianton frame and cc3d open pilot board,emax motors and blhelis escs what I discover is all the motors are spinning in Same direction
-
Change it by swapping two cables from ESC to motor. Libre Pilot can’t change it, but if your ESC support a programmable direction change you may be successful with live output on output screen. It’s the beep method, the output slider simulates a transmitter stick.
Udo
Rettet den Luftraum, esst mehr Vögel