LibrePilot Forum

General Category => General Discussion => Topic started by: hughc on January 05, 2019, 11:12:41 pm

Title: CC3D Evo don't connect.
Post by: hughc on January 05, 2019, 11:12:41 pm

I purchased a couple of CC3D Evos.  These are the CC3D model with satellite receiver connectors, fits my Specktrum DSM satellites.  Neither of the CC3Ds connect to my computer.  Both CC3Ds display this symptom-
        A slow fading in and out of the blue LED with the green LED on indicates that the board is in bootloader mode. 
What do you do with this?

Title: Re: CC3D Evo don't connect.
Post by: f5soh on January 05, 2019, 11:17:31 pm

Go to firmware tab, hit Upgrade&Erase and next, connect board.

If bootloader is v3, update to v4 (https://librepilot.atlassian.net/wiki/spaces/LPDOC/pages/5669026/Firmware+Tab#FirmwareTab-Updatebootloader)