LibrePilot Forum
General Category => General Discussion => Topic started by: coolt5 on July 21, 2018, 11:04:41 am
-
Hi all
i have a cc3d and it was working fine . then i was going to flash beta flight 3.2 on it so when its start flashing the firmware by mistake i unplug the usb from the computer . and get flash error . so i recycle the power for cc3d but its only light green study . and in my computer its unknown usb device (Windows has stopped this device because it has reported problems. (Code 43)
A request for the USB device descriptor failed.)
so any one can help me how to recover it or how to fix this .
thank in advance
-
Are you going to BF? If so, you should ask for help there.
If going to LP, you may need to reflash bootloader, then normal firmware.
http://www.southquay3d.com/index.php?route=news/article&news_id=9
<then>
https://librepilot.atlassian.net/wiki/spaces/LPDOC/pages/5669026/Firmware+Tab#FirmwareTab-Updatefirmware
<and maybe Windows driver issues>
https://librepilot.atlassian.net/wiki/spaces/LPDOC/pages/12812343/Troubleshooting