LibrePilot Forum
Users => Vehicles - MultiRotors => Topic started by: kojotuse on July 17, 2015, 07:39:04 pm
-
Hi :),
currently I'm building my first 250-class quad. Today I had first flight and... it's need tuning ;)
The build conststs of:
- laminate frame
- RCX 2208 1800KV motors
- 5x4,5 props, in future 6x4,5
- DYS SN20 blheli escs
- CC3D flight controller with openpilot 15.02.2
- mini eleres (Polish community fork of LRS) radio
Some photos:
(http://i.imgur.com/opYQhkO.jpg)
(http://i.imgur.com/o8N6rYB.jpg)
(http://i.imgur.com/jyNOPZu.jpg)
-
Is that frame your own design? Did you get the frame laser cut? It looks like something you can fly and enjoy without worrying about breaking it! Space on the front for a camera?
-
Is that frame your own design?
No, it's not my design ;). This guy made it: http://rc-fpv.pl/memberlist.php?mode=viewprofile&u=889
Did you get the frame laser cut?
It was milled by http://rc-fpv.pl/memberlist.php?mode=viewprofile&u=1769
It looks like something you can fly and enjoy without worrying about breaking it!
I'm flying this quad since yestarday, and got few crashes into gorud, not so heavy. Frame's taken it without any injure. I can tell more in the future :)
Space on the front for a camera?
Yes, it's for camera. I've got Sony 700 camera with eachine 200mW Tx, but still don't have neither fpv monitor nor googles ;)
-
Hope to see video soon :)
I built my first quad 5 months ago. I had used a few cheap Chinese quads before. I crashed them and my self build quad quite a lot of times, but slowly getting better, no real crash for weeks now, not even losing many props at the moment (three clean flights today :) )
I will put up some photos and videa asap, only I did not use my camera for weeks and need to charge and fly it for some new video :)