LibrePilot Forum
General Category => General Discussion => Topic started by: JHBDrones on May 12, 2018, 07:38:28 pm
-
Ok, so a CC3D board iam using is having a bunch of issues.
Firstly, I've tried Erase and Update, it doesnt work. Then I've tried Rescue, it doesn't work. But the board is detected and the picture shows that everything else is fine. is there a way to fix this issue?
-
Your screen show the board after a Rescue, no issue except the undefined firmware onboard.
Can be from a unfinished firmware update.
Hit Upgrade&Erase and
Connect board