LibrePilot Forum

General Category => General Discussion => Topic started by: Dillwhacker on March 04, 2018, 09:31:16 pm

Title: Hex motor direction help please
Post by: Dillwhacker on March 04, 2018, 09:31:16 pm

Hi All,
My first time using Librepilot, and trying to setup a cheap hex I bought, and I'm stumped at the first hurdle...
The setup wizard shows the NE prop as clockwise.
The configuration tab shows the North East motor as anticlockwise.....
Can anybody offer some words of wisdom?
Thanks!

Title: Re: Hex motor direction help please
Post by: f5soh on March 04, 2018, 09:51:12 pm

Default is clockwise for NE motor in both places:
Config tab
(https://forum.librepilot.org/index.php?action=dlattach;topic=4166.0;attach=7252)

Wizard
(https://forum.librepilot.org/index.php?action=dlattach;topic=4166.0;attach=7254)

Maybe you checked the "Reverse all motors" in config tab ?
Please note this option do not reverse motors but simply allow alternative configuration with NE motor anticlockwise and preserve Yaw behavior.

Title: Re: Hex motor direction help please
Post by: Dillwhacker on March 04, 2018, 10:14:22 pm

Thank you so much f5soh.
You are dead right, reverse was checked in config. I don't remember doing it, but I must have accidentally done it somehow.
Much appreciate the quick reply, well done & thanks again.
Trev