LibrePilot Forum
Development => Hardware => Topic started by: xfce on January 19, 2018, 02:41:11 am
-
Hi all,
I have designed a new PCB, make Oplink and Hc-05 together, and use FreeCAD design a sketch case.
only test the function, it is OK.
3D PCB top
(https://vgy.me/7CeHR5.png)
3D PCB bottom
(https://vgy.me/Rbupde.png)
PCB
(https://vgy.me/qM45US.png)
PCBA
(https://vgy.me/ZWArT8.png)
up case
(https://vgy.me/q69kVr.png)
down case
(https://vgy.me/UYl1qU.png)
connect with DEVO-7E
(https://vgy.me/Je8Cb0.png)
Design files are here
https://github.com/xfce/oplink-hc05
-
Awesome! Where can I get one?
-
Awesome! Where can I get one?
I have upload the files for DIY, you can have a try^-^