LibrePilot Forum

General Category => General Discussion => Topic started by: irish1234 on January 13, 2018, 07:21:16 pm

Title: Trouble with CC3D connecting to LibrePilot
Post by: irish1234 on January 13, 2018, 07:21:16 pm

Hello all,

     pretty new to this quadcopter hobby. I'm having an issue with connecting the CC3D to LibrePilot. The Tx/Rx bars do not light up when the CC3D is attached to the computer but the CC3D is flashing. It seems like there is no connection. I've tried about 4 mini-usb wires to solve the problem so I don't believe it is because they are a "charging" only wire. Any troubleshooting help would be appreciated. Thanks.

Title: Re: Trouble with CC3D connecting to LibrePilot
Post by: f5soh on January 13, 2018, 10:18:24 pm

Hi,

Try a Manual update:
- Disconnect board
- Firmware tab, click "Upgrade&Erase"
- Connect board

Maybe post a picture with your board.

Title: Re: Trouble with CC3D connecting to LibrePilot
Post by: irish1234 on January 13, 2018, 11:42:14 pm

Looks like that did the trick! thanks for the assist

Title: Re: Trouble with CC3D connecting to LibrePilot
Post by: f5soh on January 14, 2018, 12:34:24 am

Great :)