LibrePilot Forum

General Category => General Discussion => Topic started by: DOm007 on September 13, 2017, 10:05:03 pm

Title: Revo Flexi I/O
Post by: DOm007 on September 13, 2017, 10:05:03 pm

Using the Revolution with S.Bus on latest 16.09. I accidentally rendered the signal pads on the PWM output servo 5 and 6. I've remapped the status LED on to the Flexi I/O and it is functional. However I can't seem to get any of the channels 7-12 to give a PWM signal working. It's it possible or not to remap PWM through the Flexi I/O?

Thanks.

Sent from my SM-N920T using Tapatalk