LibrePilot Forum

General Category => General Discussion => Topic started by: Wingspanner on August 26, 2017, 05:12:38 pm

Title: Setting up failsafe cc3d futaba 6ex
Post by: Wingspanner on August 26, 2017, 05:12:38 pm

Hi guys, im having a problem setting up my failsafe. Drone flies great but need to get it done for safety.


(http://)
(http://)

Although my flighmode switches from pos1 to pos 2 I cant get the motors to shut off.
Also when i switch off my transmitter it doesnt switch from pos1 to pos2.
The transmitter signal light on the librepilot software show green and as if signal is still received?

Any ideas

Title: Re: Setting up failsafe cc3d futaba 6ex
Post by: f5soh on August 26, 2017, 05:23:05 pm

If your receiver still output valid signal (or last signal received) the FC cannot known something wrong appeared.
When FC detect signal lost in input, the systemHealth show a Orange INPUT alarm and FC failsafe occurs.

Take a look here: https://librepilot.atlassian.net/wiki/spaces/LPDOC/pages/2818084/Input+Configuration#InputConfiguration-FailsafeSettings

Title: Re: Setting up failsafe cc3d futaba 6ex
Post by: Wingspanner on August 26, 2017, 05:29:02 pm

Cheers i'll read into it