LibrePilot Forum
Users => Vehicles - MultiRotors => Topic started by: Joffrey on August 24, 2017, 03:26:50 am
-
Hello,
Is it possible to change the orientation of the CC3D to have the usb connector on the side of my quad ?
Actually the connector is toward the back, and there is the video transmitter, and I have to disassemble my quad to connect the cable...
I have seen that it is possible to change motor number... Is it the good way ?
Thanks !
-
Sure. Don't change motor numbers / ESC connectors. Just rotate the board and do this change to "RotateVirtual" setting.
https://librepilot.atlassian.net/wiki/spaces/LPDOC/pages/2818092/CC+Attitude+Configuration
-
thanks !!