LibrePilot Forum

General Category => General Discussion => Topic started by: hunter12 on July 09, 2017, 01:04:56 am

Title: how to reset my esc
Post by: hunter12 on July 09, 2017, 01:04:56 am

all my esc stopped working.when I crossed a power line on my lipo battery .there was some smoke an now my battery doesn't take a charge an my motors don't run. help please. thankyu

Title: Re: how to reset my esc
Post by: TheOtherCliff on July 09, 2017, 01:48:39 am

Does this have LibrePilot on it?

If you are very lucky then maybe the only problem is the battery.

Do you have a different battery?  One that works?

What happens if you plug the FC in to USB?

Title: Re: how to reset my esc
Post by: hunter12 on July 11, 2017, 07:22:59 am

ordered new batteris ill get back to yu when thay arrive

Title: Re: how to reset my esc
Post by: AerialPerPlexity on July 12, 2017, 12:13:31 am

Do you have a multimeter?  Or any other way to check the batterys. I have touched positive and negative wires to were I have seen sparks on a couple of my battery's by accident soldering new connectors to them and they still worked.   It sounds like you fried something else if you smelt smoke. Did you see any smoke? Does anything power up? USB from the computer to the fc?