LibrePilot Forum
Development => GCS General => Topic started by: jaredcg on July 04, 2017, 02:02:18 am
-
My op link mini in not showing up in the config page or under firmware page but it shows its connected.
I did a bootloader rescue and same thing any help would be appreciated.
-
Flash current firmware (not bootloader) using manual (rescue) method.
-
flashed that as well using the rescue method same result
-
You MUST flash firmware AFTER bootloader updater if you flash bootloader updater.
If flashing was successful then (WIndows) it may be a driver problem. You might try a different computer to see it it works there.