LibrePilot Forum

Users => Vehicles - Helicopters => Topic started by: demigodspecial on June 15, 2017, 04:05:01 pm

Title: coaxial drone
Post by: demigodspecial on June 15, 2017, 04:05:01 pm

Hi. I have one motor which is here:
https://hobbyking.com/en_us/contra-rotating-bl-system-375w.html
and two servos in my drone. I want to set up it with librepilot. Any tips or ideas how can i do that? Or atleast i want to setup the motor but there is no dualcopter option in libreplot. Have a good day.

Title: Re: coaxial drone
Post by: daveapplemotors on June 15, 2017, 05:59:25 pm

I wonder if this would work?

Set one motor as main and one as tail. Same as some others have with a tail motor and fixed pitch heli. The tail counters torque from thrust and rotates the craft as you wish.

Title: Re: coaxial drone
Post by: demigodspecial on June 15, 2017, 06:08:53 pm

Quote from: daveapplemotors on June 15, 2017, 05:59:25 pm

I wonder if this would work?

Set one motor as main and one as tail. Same as some others have with a tail motor and fixed pitch heli. The tail counters torque from thrust and rotates the craft as you wish.

Thank you for the tip! I will try this.