LibrePilot Forum
General Category => General Discussion => Topic started by: vk4tec on April 04, 2017, 08:27:34 pm
-
So I have my Revo ( large ) hooked up to USB to libre pilot ( good connection )
I have a uBlox NEO-M8N hooked up to the Main Port
I have 5 volts applied to servo port 1 to supply volts to cc3d servo ports ( GPS wont work without it )
The GPS module has a green light come on now.
I fire up libre pilot.
Hardware tab ( I can see the REVO is connected )
Main port - GPS
Main port - speed 57600
Main port - Protocol UBX
Can you believe all I forgot to do was a REBOOT !
How embarrassing - now I have GPS is "brown" to "RED" - GPS is RX data because no fix yet
Let me place this just outside my house ( wait for it )
Ok now I have a Orange / Green status for GPS status . Means < 7 satellites
Wow - thank you so much !!
Please add this into the instructions.
I can now add GPS telemetry to my plane.
Flight Data page - the icon has moved to my home !!
GPS has blue flash LED - we are in business !!
Awesome - Andrew
:-*
-
Attached image
-
Result
-
Status
-
Well thanks for this !
Will be doing my first ever configure of revolution and ublox soon and you've upped my confidence levels a bit !
Cheers