LibrePilot Forum
General Category => General Discussion => Topic started by: TimBuckThree on March 12, 2017, 06:56:06 pm
-
Hi Guys!
I feel like a total idiot, but I have been trying to do this and failing for way too long. I am a total noob, so I am most likely missing something obvious, but don't know it. Supposedly my answer is in this thread (https://forum.librepilot.org/index.php?topic=2421.0) But I followed the directions ( I think) and stilllll cant get it to work.
I want Accessory 1 to be pos1-Disarm. pos2-Arm. Pos3-Arm with AirMode(ASWA)
I attached what my settings are, and the guide I am following. If you know how to do this, and wouldn't mind breaking it down to super simple terms, that would be great. I am not good with this stuff and kind of need the step by step. I can post anything else you may need to know to solve the problem.
I greatly appreciate it, thanks!
-
Your Accessory0 - min value is set to 150... should not happens.
Same for current value, Accessory0 show 2013 and Accessory1 use 1995 max.
Redo a manual calibration and adjust neutrals for Accessory0 and Accessory1