LibrePilot Forum

Development => GCS General => Topic started by: YellowJacket on January 24, 2017, 04:28:27 pm

Title: Vehicle Setup Wizard display problems
Post by: YellowJacket on January 24, 2017, 04:28:27 pm

This is pretty basic, but very frustrating. 

Running Windows 10 laptop with a 1080 resolution: I cannot see the bottom of the "vehicle setup wizard" window when it pops up.  I have tried adjusting my display settings and the only way I have found to see the bottom of the window makes the font so tiny it's very hard to see.  No problems viewing other parts of the software.

Any ideas?

Title: Re: Vehicle Setup Wizard display problems
Post by: TheOtherCliff on January 24, 2017, 05:28:23 pm

I've had similar problems when using Windows 7.  I worked around it by making the task bar "auto hide".  I recall you right click on the task bar, select properties, and look there for some options.

Title: Re: Vehicle Setup Wizard display problems
Post by: f5soh on January 24, 2017, 06:14:38 pm

Strange, wizard window should be 800x600

(https://forum.librepilot.org/index.php?action=dlattach;topic=2975.0;attach=5141)

Title: Re: Vehicle Setup Wizard display problems
Post by: TheOtherCliff on January 25, 2017, 04:16:39 am

I should have clarified.  I had a similar problem with a different Windows program, not with GCS.

Title: Re: Vehicle Setup Wizard display problems
Post by: YellowJacket on January 30, 2017, 03:25:51 pm

Quote from: f5soh on January 24, 2017, 06:14:38 pm

Strange, wizard window should be 800x600

(https://forum.librepilot.org/index.php?action=dlattach;topic=2975.0;attach=5141)

I tried adjusting my screen to this resolution (800x600), It's the lowest one available on my settings.  Yes it fits and I can actually read the fonts, Thank you.  Of course I am losing quite a bit of width available from my monitor. Interesting.