LibrePilot Forum
Development => Hardware => Topic started by: trufy on January 11, 2017, 06:53:47 pm
-
Hi guys,
I have a Brushed Sparky from taulabs (James Cotton) https://github.com/TauLabs/TauLabs/wiki/Brushed-Sparky , which i would like to bring to LibrePilot. As fas as i know it has a built in Sparky 2 which should run on the same Firmware. I tried to flash the Bootloader of the Sparky2 Board, but i get the "Wrong Device ID" error. Is there a way to override this error?
thanks of any hint.
-
Brushed Sparky is not currently supported by LP. Sorry. :(
-
I've implemented initial support for the brushed sparky 2, but it still have some rough edges. I can push an updated branch that contains the support, but I don't know when it will be officially supported.